FH200 2.00 mm female headers with single- or dual-row through-hole and dual-row SMT options. Review socket height, materials and mating dimensions.
Send your drawing and quantity. Response within one business day.
FH200 drawing reference
Use these drawing values for initial selection. Check the row layout, mounting and dimensions for the exact configuration before ordering; matching pitch alone does not establish mating compatibility.
| Parameter | Drawing value / scope |
|---|---|
| Series | FH200 |
| Pitch | 2.00 mm |
| Current rating | 2 A AC/DC |
| Voltage rating | 250 V AC/DC |
| Withstanding voltage | 1,000 V AC for 1 minute |
| Temperature range | −25°C to +85°C |
| Insulation resistance | 1,000 MΩ minimum |
| Contact resistance | 20 mΩ maximum |
| Single-row drawing tables | 2–40 positions; select the applicable configuration table |
| Dual-row drawing tables | 2 × 2 through 2 × 40 positions; not every mounting or height combination |
Configuration selection
The configurations below follow the supplied series drawings. They are not interchangeable options for every part. Include the required construction in your request.
Single- and dual-row right-angle through-hole configurations use PBT or PA6T bodies and gold-flash brass or phosphor-bronze contacts, as specified on each drawing. Confirm the material and contact construction of the selected version.
Single- and dual-row straight through-hole drawings have configuration-specific body heights, widths and solder tails. PBT and PA6T versions use different contact constructions; the dimensions are not interchangeable.
The reviewed SMT configuration is dual-row, with a black PA6T body and gold-flash phosphor-bronze contacts. Confirm the selected housing height and pad layout. These drawings do not establish a single-row SMT version.
Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
Drawing and quantity review
A dimensioned drawing, BOM or marked-up sketch helps identify the required header configuration.
