Single-row IDC housings
PA66 housings with phosphor-bronze terminals are shown in closed-end and feed-through forms, each with or without polarizing tabs. Wire options are 22, 24, 26 and 28 AWG, with colour tied to wire size.
Confirm your configuration
D2559 connector series
D2559 is a 2.54 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 2.54 mm |
| Drawing reference voltage | 250 V AC/DC |
| Drawing reference current | 3 A AC/DC |
| Drawing reference temperature | −40°C to +105°C |
Drawings
D2559 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
D2559 Technical Drawings
Engineering response
Need a review of D2559 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.