Cable housings
PA66 housings include single-row 2–12 positions and dual-row 2 × 1 through 2 × 12 positions. Select the housing and matching contact together; a listed board connector does not establish every possible mating combination.
Confirm your configuration
C3030 connector series
A 3.00 mm connector system with single-row and dual-row cable housings, crimp contacts, and THT or SMT board connectors. Compare wire-to-wire and wire-to-board configurations using the matching drawing.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Crimp contacts
The terminal drawings specify phosphor bronze, tin-plated or gold-flash versions, and 20–24 AWG wire. Finish and terminal selection are separate from the PCB contact construction.
Through-hole board connectors
Reviewed right-angle and vertical THT versions use PBT or LCP depending on the variant. Selected single-row tables list 1–12 positions; dual-row tables list 2 × 1 through 2 × 12. A 1-position wafer does not establish a matching 1-position housing.
SMT board connectors
Right-angle and vertical SMT drawings specify LCP bodies with matte-tin-plated brass contacts. Single-row tables list 2–12 positions; dual-row tables list 2 × 1 through 2 × 12. Do not combine these into a continuous 1–24 range.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 3.00 mm |
| Configuration | Wire-to-wire and wire-to-board options; single or dual row |
| Listed positions by configuration | Single-row housings / SMT: 2–12; selected single-row THT: 1–12; dual row: 2 × 1 through 2 × 12 (even contact counts only) |
| Current rating | 5 A AC/DC |
| Voltage rating | 250 V AC/DC |
| Crimp-terminal wire range | 20–24 AWG |
| Operating temperature | −25°C to +85°C |
| PCB termination | THT / SMT |
| Orientation | right-angle / vertical |
Drawings
C3030 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
C3030 Technical Drawings
Engineering response
Need a review of C3030 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.