Choose an LDZY 2.50 mm single-row wire-to-board configuration with 2–15 positions. Compare the housing and straight or right-angle through-hole board connectors, then confirm the terminal and wire for your assembly.
Connector construction
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
White PA66 housing and straight or right-angle PA66 through-hole board connectors are documented. The crimp terminals fit the A2502 housing and accept 22–28 AWG wire; confirm insulation diameter and the selected terminal finish.
Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 2.50 mm |
| Rated voltage | 250 V AC/DC |
| Rated current | 3 A AC/DC |
| Temperature range | -25 to +85 °C |
| Listed positions | 2-15 in the housing and board connector tables |
| Crimp-terminal wire range | 22–28 AWG |
Select the complete connection
A2502 is an LDZY 2.50 mm, single-row wire-to-board series. The published drawings show housings and straight or right-angle through-hole board connectors with 2–15 positions. Choose the position count and mating direction, then check the corresponding housing, terminal and board layout.
| Part | Documented construction | Check before ordering |
|---|---|---|
| Cable-side housing — page 1 | White PA66, single row, 2–15 positions. | Position count, mating profile, cable orientation and the selected contact. |
| Crimp terminal — page 2 | 22–28 AWG terminal options for the A2502 housing. | Select the terminal finish and confirm wire construction and insulation diameter. |
| Straight board connector — page 2 | White PA66 through-hole construction, 2–15 positions. | Vertical mating direction, body dimensions, PCB hole pattern and available mating space. |
| Right-angle board connector — page 3 | White PA66 through-hole construction, 2–15 positions. | Mating parallel to the board, side clearance, pin position and the selected PCB layout. |
Open the three-page technical drawing below →
Before requesting a quote
Housings, terminals and board connectors can be supplied separately or as a set. Standard connector samples are free, excluding freight. Typical production MOQ is 1,000–5,000 pieces per model or configuration; confirm the quantity for your selection during quotation. Packaging can follow your requirements.
Need a finished cable? Include wire lengths, connector ends, pinout and any labels or protection requirements.
Pitch alone is not enough. Check the complete mating profile, polarization, contact geometry and specified counterpart before approving a pair.
No. Review the body envelope, cable route and PCB layout for the exact version. A connection that fits electrically may still interfere with the enclosure or leave insufficient mating access.
Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
Engineering response
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.
