Tall single-row housing
The PA66 housing is explicitly identified as the HB profile. Its drawing set includes a crimp terminal and straight or right-angle PBT through-hole board connectors.
Confirm your configuration
A2501HB connector series
A2501HB is a 2.50 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 2.50 mm |
| Rated voltage | 250 V AC/DC |
| Rated current | 3 A AC/DC |
| Temperature range | -25 to +85 °C |
| Wire range | 22-28 AWG |
| Listed positions | 2-19 and 25 in the housing and board connector tables; intermediate counts are not established |
Drawings
A2501HB Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A2501HB Technical Drawings
Engineering response
Need a review of A2501HB connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.