Single-row housing and board connectors
The housing and straight through-hole board variant use glass-filled PA66; the right-angle board variant uses glass-filled PBT. Contacts are tin-plated brass.
Confirm your configuration
A2019 connector series
A2019 is a 2.00 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 2.00 mm |
| Rated voltage | 250 V AC/DC |
| Rated current | 3 A AC/DC |
| Temperature range | -25 to +85 °C |
| Wire range | 26-30 AWG |
| Listed positions | 2-15 in the housing and board connector tables |
Drawings
A2019 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A2019 Technical Drawings
Engineering response
Need a review of A2019 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.