Single-row connection
PA66 housing, a tin-plated phosphor-bronze terminal, and straight or right-angle through-hole board connectors are shown. Confirm the wire gauge against the selected terminal drawing.
Confirm your configuration
A2006 connector series
A2006 is a 2.00 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 2.00 mm |
| Rated voltage | 250 V AC/DC |
| Rated current | 3 A AC/DC |
| Temperature range | -25 to +85 °C |
| Listed positions | 2-16 in the housing and board connector tables |
Before requesting a quote
Confirm your A2006 configuration
Select the straight or right-angle through-hole board connector and the cable-side parts together.
- The reviewed housing and board tables list 2–16 positions. Confirm entry direction and the selected PCB hole pattern.
- Provide the intended wire gauge and terminal drawing so the wire range can be checked for the selected crimp terminal.
Request housings, terminals and board connectors separately or as a set. Samples are free; typical production MOQ is 1,000–5,000 pieces. Specify your required packaging in the inquiry.
Include the drawing reference, required positions, housing and mating connector, wire size and quantity in your inquiry.
Drawings
A2006 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A2006 Technical Drawings
Engineering response
Need a review of A2006 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.