Crimp housing and terminal
PA66 housings list 2–18 positions. The terminal drawing specifies 24–30 AWG wire. Match the terminal, housing and required circuit count together.
Confirm your configuration
A2001 connector series
A 2.00 mm single-row wire-to-board connector system with crimp housings and THT or SMT board connectors. Position counts and insulator materials depend on the mounting and entry direction.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Through-hole board connectors
The right-angle and vertical THT drawings specify PA66 bodies and list 2–18 positions. Select the footprint and entry geometry for the exact version.
SMT board connectors
Both SMT drawings list 2–15 positions. The right-angle version specifies PA9T; the vertical version specifies PA6T. The larger housing/THT count must not be applied to SMT.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 2.00 mm |
| Configuration | Single-row wire-to-board |
| Listed positions by configuration | Housing / THT: 2–18; SMT: 2–15 |
| Current rating | 2 A AC/DC |
| Voltage rating | 100 V AC/DC |
| Applicable wire range | 24–30 AWG |
| PCB termination | THT / SMT |
| Orientation | right-angle / vertical |
Before requesting a quote
Confirm your A2001 configuration
Choose THT or SMT first, then check the position count for that construction.
- Housing and THT tables list 2–18 positions; the SMT tables list 2–15. Confirm both sides when requesting 16–18 positions.
- Specify right-angle or vertical entry and the matching footprint. For the cable side, confirm the terminal against the listed 24–30 AWG wire range.
Request housings, terminals and board connectors separately or as a set. Samples are free; typical production MOQ is 1,000–5,000 pieces. Specify your required packaging in the inquiry.
Include the drawing reference, required positions, housing and mating connector, wire size and quantity in your inquiry.
Drawings
A2001 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A2001 Technical Drawings
Engineering response
Need a review of A2001 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.