Two-position housing profiles
Both reviewed housing drawings are two-position single-row constructions with Nylon 66 bodies; the side and latch features differ.
Confirm your configuration
A1800 connector series
A1800 is a 1.80 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Right-angle SMT board profiles
Both reviewed board drawings are two-position right-angle SMT constructions with LCP bodies and tin-plated brass contacts and solder tabs. The crimp terminal uses tin-plated phosphor bronze.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.80 mm |
| Drawing-reference current | 3.2 A AC/DC |
| Drawing-reference voltage | 350 V AC/DC |
| Temperature range | -25 to +85 °C |
| Terminal wire range | 22–26 AWG; insulation outside diameter 1.3 mm maximum |
Drawings
A1800 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1800 Technical Drawings
Engineering response
Need a review of A1800 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.