Single-row housing
The PBT housing table lists 2–16 positions and size-specific body profiles.
Confirm your configuration
A1506 connector series
A1506 is a 1.50 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
SMT board profiles
Both board tables list 2–16 positions with PA9T bodies and brass contacts and solder tabs. Some angle labels differ from the depicted profiles, so select by the exact approved drawing and PCB footprint.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.50 mm |
| Drawing-reference current | 2 A AC/DC |
| Drawing-reference voltage | 100 V AC/DC |
| Temperature range | -25 to +85 °C |
| Terminal wire range | 24–28 AWG for the terminal table; insulation outside diameter 1.2 mm maximum |
Drawings
A1506 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1506 Technical Drawings
Engineering response
Need a review of A1506 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.