Single-row housing
The PBT housing table lists 2–15 positions and shows size-specific latch and body profiles.
Confirm your configuration
A1502 connector series
A1502 is a 1.50 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Straight and right-angle SMT
The board tables each list 2–15 positions, with beige LCP bodies and matte-tin-plated brass contacts.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.50 mm |
| Drawing-reference current | 2 A AC/DC |
| Drawing-reference voltage | 100 V AC/DC |
| Temperature range | -25 to +85 °C |
| Terminal wire range | 24–28 AWG; insulation outside diameter 1.10 mm maximum |
Drawings
A1502 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1502 Technical Drawings
Engineering response
Need a review of A1502 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.