Single-row housing
The PA66 housing table lists 2–15 positions, with different body features for smaller and larger configurations.
Confirm your configuration
A1259 connector series
A1259 is a 1.25 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
SMT board connectors
Straight and right-angle board tables each list 2–15 positions. The drawings specify LCP bodies, phosphor-bronze contacts and brass solder tabs with a matte tin finish.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.25 mm |
| Drawing-reference current | 1 A AC/DC |
| Drawing-reference voltage | 50 V AC/DC |
| Temperature range | -25 to +85 °C |
| Terminal wire range | 26–28 AWG for the pictured terminal; insulation outside diameter 0.9 mm maximum |
Drawings
A1259 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1259 Technical Drawings
Engineering response
Need a review of A1259 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.