Cable-side housings
The female housing table lists 2–18 positions; the male housing table lists 2–15. Both specify PA66 and matching crimp terminals.
Confirm your configuration
A1250 connector series
A1250 is a 1.25 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Through-hole and SMT board connectors
Through-hole straight and right-angle tables list 2–18 positions. The straight SMT table lists 2–18; the right-angle SMT table lists 2–16. Body resin and dimensions depend on the selected board construction.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.25 mm |
| Drawing-reference current | 1 A AC/DC |
| Drawing-reference voltage | 125 V AC/DC |
| Temperature range | -25 to +85 °C |
| Terminal wire range | 28–32 AWG; insulation outside diameter 1.0 mm maximum |
Drawings
A1250 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1250 Technical Drawings
Engineering response
Need a review of A1250 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.