Single-row housing
The housing table lists 2–9 positions and specifies PBT or PA66 body options for the selected configuration.
Confirm your configuration
A1205 connector series
A1205 is a 1.20 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Right-angle SMT board connector
The board tables list 2–9 positions and PA9T or LCP body options with gold-flash contacts. Dimension columns differ between repeated pages, so confirm the current approved footprint before PCB release.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.20 mm |
| Drawing-reference current | 1 A AC/DC |
| Drawing-reference voltage | 50 V AC/DC |
| Temperature range | -25 to +85 °C |
| Terminal wire range | 28–32 AWG; insulation outside diameter 0.8 mm maximum |
Drawings
A1205 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1205 Technical Drawings
Engineering response
Need a review of A1205 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.