Dual-row housing
The Nylon 46 housing table lists 2 × 8, 2 × 10, 2 × 15, 2 × 20 and 2 × 25 positions.
Confirm your configuration
A1013 connector series
A1013 is a 1.00 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Dual-row SMT profiles
The board drawings specify PA6T and gold-flash brass contacts. Their position lists differ from the housing list, so the selected pair and footprint require drawing-level confirmation.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.00 mm |
| Drawing-reference current | 1 A AC/DC |
| Drawing-reference voltage | 50 V AC/DC |
| Temperature range | -25 to +85 °C |
| Terminal wire range | 28–32 AWG; insulation outside diameter 0.8 mm maximum |
Drawings
A1013 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1013 Technical Drawings
Engineering response
Need a review of A1013 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.