Grounded housing
The housing drawings specify Nylon 46 and a stainless-steel ground plate.
Confirm your configuration
A1012 connector series
A1012 is a 1.00 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Lock-lever housing
An additional housing profile includes a stainless-steel lock lever. The accompanying board drawing has a separate series identity and must be selected as part of the mating assembly.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.00 mm |
| Drawing-reference current | 1 A AC/DC |
| Drawing-reference voltage | 200 V AC/DC |
| Temperature range | -25 to +85 °C |
| Overview wire reference | 28–32 AWG |
Drawings
A1012 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1012 Technical Drawings
Engineering response
Need a review of A1012 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.