Grounded cable-side housing
The A1008 housing drawing specifies Nylon 46 with a stainless-steel ground plate and a 1.00 mm contact pitch.
Confirm your configuration
A1008 connector series
A1008 is a 1.00 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Mating-component selection
The accompanying board connector and terminal pages carry a different series identity. Confirm the complete mating assembly against the housing drawing rather than treating those components as additional A1008 variants.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.00 mm |
| Housing drawing current | 1 A AC/DC |
| Housing drawing voltage | 200 V AC/DC |
| Housing temperature range | -25 to +85 °C |
Drawings
A1008 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1008 Technical Drawings
Engineering response
Need a review of A1008 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.