Single-row housing
The A1006 housing table lists 20 and 30 positions and specifies PA46. A separately labelled housing on the same page is not an additional A1006 configuration.
Confirm your configuration
A1006 connector series
A1006 is a 1.00 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Right-angle SMT board connector
The A1006 board table lists 20 and 30 positions, with an LCP body, gold-flash phosphor-bronze contacts and a tin-plated phosphor-bronze shell.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.00 mm |
| Drawing-reference current | 1 A AC/DC |
| Drawing-reference voltage | 200 V AC/DC |
| Temperature range | -25 to +85 °C |
| Terminal wire range | 28–32 AWG; insulation outside diameter 0.8 mm maximum |
Drawings
A1006 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1006 Technical Drawings
Engineering response
Need a review of A1006 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.