Single-row housing
The housing table lists 2–20 positions with a white Nylon 66 body and a tin-plated phosphor-bronze terminal.
Confirm your configuration
A1005 connector series
A1005 is a 1.00 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Right-angle SMT board connector
The SMT table lists 2–20 positions. The drawing specifies Nylon 9T and tin-plated brass pins and solder tabs.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.00 mm |
| Drawing-reference current | 1 A AC/DC |
| Drawing-reference voltage | 125 V AC/DC |
| Temperature range | -25 to +85 °C |
| Terminal wire range | 28–32 AWG; insulation outside diameter 0.92 mm maximum |
Drawings
A1005 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1005 Technical Drawings
Engineering response
Need a review of A1005 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.