Dual-row housings
The housing table lists 20, 30, 40 and 50 total positions, with Nylon 66 bodies and two profiles shown.
Confirm your configuration
A1004 connector series
A1004 is a 1.00 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Dual-row SMT board connector
The straight SMT table lists 20, 30, 40 and 50 total positions. The drawing specifies PA6T, tin-plated phosphor-bronze pins and tin-plated brass solder tabs.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.00 mm |
| Drawing-reference current | 1 A AC/DC |
| Drawing-reference voltage | 50 V AC/DC |
| Temperature range | -25 to +85 °C |
| Terminal wire range | 28–32 AWG; insulation outside diameter 0.8 mm maximum |
Drawings
A1004 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1004 Technical Drawings
Engineering response
Need a review of A1004 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.