Single-row cable housing
The drawing specifies a white Nylon 66 housing and a tin-plated phosphor-bronze crimp terminal.
Confirm your configuration
A1003 connector series
A1003 is a 1.00 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Right-angle SMT board connector
The board drawing specifies Nylon 9T, phosphor-bronze contacts and solder tabs. Position and dimensional entries must be confirmed for the selected configuration; the tables do not establish every count through the largest listed size.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.00 mm |
| Drawing-reference current | 1 A AC/DC |
| Drawing-reference voltage | 50 V AC/DC |
| Temperature range | -25 to +85 °C |
| Terminal wire range | 28–32 AWG; insulation outside diameter 0.8 mm maximum |
Drawings
A1003 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1003 Technical Drawings
Engineering response
Need a review of A1003 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.