Housing profiles
Both single-row housing tables list 2–20 positions and LCP bodies, with gold-plated or tin-plated phosphor-bronze terminals as specified for the selected configuration.
Confirm your configuration
A1000 connector series
A1000 is a 1.00 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
Right-angle SMT board connector
The board connector table lists 2–20 positions. Its drawing specifies an LCP body, tin-plated phosphor-bronze pins and tin-plated brass solder tabs.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 1.00 mm |
| Drawing-reference current | 0.5 A AC/DC |
| Drawing-reference voltage | 30 V AC/DC |
| Temperature range | -25 to +85 °C |
| Overview wire reference | 32 AWG |
Drawings
A1000 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A1000 Technical Drawings
Engineering response
Need a review of A1000 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.