Single-row housing
The A0800 housing drawing specifies PA66. Its table lists 2–9, 12, 14–17 and 20 positions; this is not a continuous 2–20 range.
Confirm your configuration
A0800 connector series
A0800 is a 0.80 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
SMT board connectors
The drawings show straight and right-angle SMT bodies. The straight table lists 2–20, 22 and 24 positions; the right-angle table lists 2–20. Body materials are configuration-specific.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 0.80 mm |
| Drawing-reference current | 0.5 A AC/DC |
| Drawing-reference voltage | 30 V AC/DC |
| Temperature range | -25 to +85 °C |
| Overview wire reference | 32 AWG |
Drawings
A0800 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A0800 Technical Drawings
Engineering response
Need a review of A0800 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.