Single-row housing
The housing table lists 2–16 positions; the drawing specifies LCP and gold-plated phosphor-bronze terminals.
Confirm your configuration
A0600 connector series
A0600 is a 0.60 mm connector system. Compare the drawing-based specifications and construction options below, then identify the required configuration for quotation.
Connector construction
Compare configuration options
Select the housing, contacts and mating connector together. The available circuit counts and materials depend on the specific drawing, rather than one range covering every variant.
SMT board connector
The right-angle single-row board connector table lists 2–16 positions with an LCP body and gold-flash contacts.
Specifications
Technical Specifications
Dimensions, materials and electrical ratings are configuration-specific. Refer to the corresponding technical drawing for part selection.
| Parameter | Specification |
|---|---|
| Pitch | 0.60 mm |
| Drawing-reference current | 0.2 A AC/DC |
| Drawing-reference voltage | 30 V AC/DC |
| Temperature range | -25 to +85 °C |
| Wire range | 34–36 AWG |
Drawings
A0600 Technical Drawings
View the drawings below or open the original PDF. Dimensions and specifications apply to the configuration and revision shown.
A0600 Technical Drawings
Engineering response
Need a review of A0600 connector series?
Send the released drawing, target configuration, quantities and any required documentation so the technical team can confirm the next step.